企業名稱：江蘇炬焰智能科技有限公司
聯系人：高先生
手機：13606285447
聯系人：陳先生（總經理）
手機：15851225200
聯系人：陸先生（總工程師）
手機：13906286961
電話：0513-83335850
郵箱：jsjuyan@163.com
地址：江蘇省啟東市南陽鎮工業園區5號
網址： www.vio88sport.com
梁夾 Beam fasteners JYL-01A
特點
■用于槽鋼在鋼結構上的免焊接免鉆孔安裝；
■梁夾組件適用于多種標準的成品支架的T型鋼梁；
■大夾扣厚度<36mm；
■材料:碳素鋼,按照DNEN10025標準生產;鍍鋅工藝符合 ASTMA153標準,鍍鋅層厚度為56μm;達克羅;環氧噴涂。
■應成對使用,槽鋼承載力需要予以校對,承載力值不適用懸臂支撐形式。
CHARACTERISTICS
■No soldering and drilling free installation of channel steel in steel structure.
■Beam clamp components are suitable for various of standard T steel beams.
■Maximum clip thickness<36mm.
■Material: carbon steel, according to DIN EN 10025 standard the galvanizing process conforms to the ASTM A153 standard, the thickness of the galvanized layer is 56um; dacromet; epoxy coating.
■Should be used in pairs, the bearing capacity of the channel steel must be proofed, and the value of the bearing capacity is not applicable to the form of cantilever support.
梁夾 Beam fasteners JYL-02A
特點
■用于槽鋼在鋼結構上的免焊接免鉆孔安裝；
■梁夾組件適用于多種標準的T型鋼梁；
■材料:碳素鋼,按照DNEN10025標準生產;鍍鋅工藝符合 ASTMA153標準,鍍鋅層厚度為56μm;達克羅;環氧噴涂。
■應成對使用,槽鋼承載力需要予以校對,承載力值不適用懸臂支撐形式。
CHARACTERISTICS
■No soldering and drilling free installation of channel steel in steel structure.
■Beam clamp components are suitable for various of standard T steel beams.
■Material: carbon steel, according to DIN EN 10025 standard the galvanizing process conforms to the ASTM A153 standard, the thickness of the galvanized layer is 56um; dacromet; epoxy coating.
■Should be used in pairs, the bearing capacity of the channel steel must be proofed, and the value of the bearing capacity is not applicable to the form of cantilever support.
梁夾 Beam fasteners JYL-03A
特點
■用于槽鋼在鋼結構上的免焊接免鉆孔安裝；
■梁夾組件適用于多種多樣標準的T型鋼梁(翼緣板厚度<30mm);
■剪力載荷;
■材料:碳素鋼,按照DIN EN10025標準生產;鍍鋅工藝符合 ASTMA153標準,鍍鋅層厚度為56μm;達克羅;環氧噴涂。
■應成對使用,槽鋼承載力需要予以校對。
CHARACTERISTICS
■No soldering and drilling free installation of channel steel in steel structure.
■Beam clamp components are suitable for various kinds of standard T steel beams （The thickness of flange< 30mm）
■Bearable shear load.
■Material: high quality carbon steel, according to DIN EN 10025 standard the galvanizing process conforms to the ASTM A153 standard, the thickness of the galvanized layer is 56μm; dacromet; epoxy coating.
■The bearing capacity of the channel steel need be proofed when it is used in pairs.
在線咨詢
